Advantages of Hot Adhesive Melter sealing boxes

The hot melting glue box is melted into a liquid with a Hot Adhesive Melter, and then sent to the surface of the carton through the throat and spray gun of the hot melting machine. It can meet the requirements of the carton sealing, and overcomes the flaws of the traditional carton sealing form.

Good packaging quality
The transport cardboard box must be able to withstand temperature, humidity changes and barbaric loading and unloading, but it is difficult to meet this requirement with tape. Because its adhesive strength is poor, the resistance is small, and the coating is not sticky for coating or oil cardboard.
The hot melting glue has a good combination with wet objects, and has a strong penetration. It plays a physical and chemical adhesive effect between corrugated paper and lining. The overall strength of the carton after the bonding of the carton is enhanced, and the carton is not easy to deform and crack. In addition, the hot -melt glue coating system can coat the rubber pressure on the key parts of various shapes, such as: the folding in the carton.

Secondly, the low temperature resistance is not resistant to the tape. Under the cold climate in the north, it is easy to open the glue; the hot melting glue is good for low temperature, and it can resist -40 ° C low temperature. In addition, the storage period of the hot melting glue is up to 2 years, and the storage is small and has no special requirements for storage. The tape storage period is only half a year, and a certain storage condition is required, otherwise it will be easy to deteriorate.

The hot melting glue also provides a good anti -theft function. Since the adhesive penetrates into the corrugated, any attempt to open the carton will tear the fiber. The tape can be cut with a knife, removed the contents unknowingly and sealed it again.

Appearance
Today, while the merchant requires that the packaging is transmitted, it can also convey the product and the company's image through the appearance design of the packaging pattern. Therefore, the less factors that hinder the effect, the better. Tape often blocks images to interfere with the transmission of packaging information; hot -melt glue is bonding between the folding room, which can provide greater display space.

Low cost
The use of hot -melt glue boxes is fast. The entire bonding process can be completed in only 1 to 3 seconds. It is suitable for batch production, less energy consumption, and low cost. The standard of the standard corrugated carton hot melting glue is about 32 yuan/1000 boxes. This is the middle price of hot melting glue, and the middle price of tape seal is about 120 yuan/1000 boxes.

If the hot melting glue is used, adding glue during processing does not cause a stop; and the tape needs to be stopped. Moreover, there may not be a partition in the box. The strength of the box is greater than that when the tape is sealed, the sealing strength of the barrier can be reduced, which can reduce the cost of the partition.

Hot Adhesive Melter Manufacture